I have no idea why your M.2 header clip is missing though. I tried the other and it fit in fine, but wouldn't work because the lane was disabled by one of the SATA drives. For what it's worth, when I got my Samsung 970 Evo, I could only put it into the one M.2 slot. Then plug the newly cloned SSD in, at which point you can format your old C drive and use it as a data drive if you want. Just bear in mind that you will need both a SATA power cable as well as a SATA data cable.įor the M.2 NVME piece, that one's a bit more of a head scratcher. If you do that, then you can get at the power cables and run them through the little holes in the case and up to the SSD. Today we are going over DIY steps on how to replace the PSU on your PC These steps are valid whether you have a modular or traditional PSU in your gaming P. There should be some thumb screws there that you undo and then you can just slide off the panel. Some case designs differ if you see more screws in non-standard locations on the power supply, remove them too. Plug the SATA power and SATA data connectors into the SSD. Connect a SATA data cable to a SATA data port on the motherboard. Return the drive caddy or screw the drive in place. At an open drive bay, remove the caddy, if there is one, and insert the SSD. The power supply is held in place with three to five screws that are accessible from the outside of the PC case. Share Email What to Know Gather the parts and tools. So, for the SSD, I believe you actually need to remove the other side panel to get to the components in the case behind the motherboard and beneath the PSU shroud. Now turn your attention to the back of the PC.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |